Choosing a Good Mold Inspection Company.

Though mold is an essential part of the natural environment, helping in breaking down dead organic matter such as fallen leaves and dead trees, indoor mold is something that should be avoided as much as possible. Mold has negative effects towards both our health and our homes. To avoid mold infestations we recommend you choose the best mold inspection companies in Bonita Springs FL. Since mold is something that should be dealt with promptly and with professional help, you should look for companies that will come and do a complete inspection of the house to get as much information about the mold as possible.

If the inspector tells you that the mold is toxic, then you should try to stop yourself and your family from going near the source of the mold as much as possible. Mold possess serious health issues. Mold can cause nasal congestion, eye irritation, rashes, and various respiratory problems.

Causes and Growing Conditions.

Mold is found everywhere and can grow on almost any surface as long as moisture is present. Mold is normally found indoors in places where it can’t normally effect a healthy human. Significant mold growth requires moisture and food sources and a substrate capable of sustaining growth. Common building materials, such as plywood, drywall, carpets, and carpet padding provide food for mold. In carpets, invisible dust and cellulose are food sources. After water damage to a building, mold grows in walls and then becomes dormant until high humidity reactivate the mold.

Since mold often grows in places where it can’t be seen by the naked eye, the only way to find mold is through smell and signs of water damage on walls and ceilings. Mold can also hide behind wallpaper and the underside of carpets. Piping in walls can also cause mold but only in rare occasions when the pipe is leaking.

Removal of Mold.

Spores need three things to grow into mold: nutrients – cellulose (the cell wall of green plants) is a common food for indoor spores; moisture – To begin the decaying process caused by mold; time -mold growth begins from 24 hours to 10 days after the provision of growing conditions. Removing 1 of the 3 requirements can reduce or outright eliminate new mold growth. The methods for removing mold are as follows;

  • Cleaning your HVAC system. Should be done by a professional.
  • Dry brushing or agitation device: Wire brushing or sanding is used when microbial growth can be seen on solid wood surfaces such as framing or underlayment (the subfloor).
  • Dry-ice blasting: Removes mold from wood and cement; however, this process may spray mold and its byproducts into surrounding air.
  • Wet vacuum: Wet vacuuming is used on wet materials, and this method is one of those approved by the EPA.
  • Damp wipe: Removal of mold from non-porous surfaces by wiping or scrubbing with water and a detergent and drying quickly.